|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Type: | Flux-cored Wire |
| Material: | Low Carbon Steel |
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Factory Directly All Positions E71t 1c 1.2mm Flux Cored Welding Wire
1. Excellent welding performance, soft and stable arc.
2. Low spatter loss, easy slag removal, Beatiful appearance of weld and high X-ray safty
3. Rutile type flux cored wire of 490Mpa high tensile steel
Instruction
1. Gas- Shielded:100% CO2 OR 75% Ar 25% CO2
2. When welding, the gas flow rate shoule keep between 15L/min and 25L/min
3.The oil stains and rust on the welding should be cleared away.
Chemical Composition of Deposited Metal
| Item | C | Mn | Si | P | S | Cr | Ni | Mo | V | Cu |
| Standard | ≤0.18 | ≤1.75 | ≤0.90 | ≤0.03 | ≤0.03 | ≤0.20 | ≤0.50 | ≤0.03 | ≤0.08 | ≤0.35 |
| ( AWS E71T-1) |
Machanical Properties of Deposited Metal
| Item | YP Rel/ Mpa | Tensile Strength/ Mpa | Elongation % | Impact Value | Impact Energy | Average (J) | ||||
| Standard | ≥400 | ≥480 | >20 | -20 | >27 | |||||
| ( AWS E71T-1C) | ||||||||||
Reference Welding Parameter (DC+) & Voltage Range
| 1.2MM | 1.6MM | |||
| Volt | 16-34V | 22-42V | ||
| Amp | 120-320A | 180-400A | ||
| CO2 Flow | 15-25L/Min | 15-25L/Min | ||
Application
Shipbuilding, Offshore, bridge, pressure vessal and general fabrications etc.
Q1: Can I have a sample for testing?
A: Yes, we can support free sample.
Q2: Can I add my logo on the boxes/cartons?
A: Yes, OEM and ODM are available from us,for the MOQ for OEM/ODM talk with us please.
Q3: What are the benefits of being a distributor?
A: Special discount Marketing protection.
Q4: Do you have inspection procedures for welding wires and welding electrode?
A: 100% self-inspection before packing. We provide Quality Certification for every order.
Q5: Can we mix itmes in one 20FT container?
A: Yes,welding wire and welding electrode can mix them in one container.
Q6: Can I have a visit to your factory before the order?
A: Sure, welcome your visit of factory, or we can have a online meeting for factory inspection.
Q7: What is the lead time for samples and mass production?
A: Samples can be ready within 3-5 working days. For mass production, it usually takes 15-25 working days, depending on the order quantity and customization requirements.
Q8: What payment terms do you accept?
A: We accept T/T (30% deposit in advance, 70% balance against B/L copy), L/C at sight, and Western Union for small orders. Other terms can be negotiated for long-term cooperation.
){kind=link}